How to use Nano-Protector
Nano Protector is a waterproof spray that creates an invisible protective layer on your shoes, preventing water, dirt, and stains from penetrating the material. Here’s a step-by-step guide to using it effectively:
Prepare the Item:
- Clean the item thoroughly to remove dirt and dust. Use a soft brush or cloth if needed.
- Ensure the surface is dry before applying the spray.
Shake the Spray:
- Shake the Nano Protector can well to ensure even distribution of the solution.
Test on a Small Area:
- Spray a small, hidden section to test for any discoloration or adverse reactions. Wait 10 minutes to check the result.
Apply the Spray:
- Hold the spray can 20-30 cm (8-12 inches) away from the surface.
- Spray evenly in a sweeping motion, ensuring full coverage but avoiding oversaturation.
Drying Time:
- Allow the treated item to dry completely. This usually takes around 24 hours for the best results.
- Keep the item in a well-ventilated area during drying.
Reapply if Necessary:
- For maximum protection, apply a second coat after the first coat has dried.
- Avoid direct exposure to rain for the first 24 hours after application.
- Reapply the Nano Protector every 1-2 months or after cleaning the treated item to maintain effectiveness.
- Store the spray in a cool, dry place.
